The best windows for a home in Mesa are dual-pane windows with a low-E coating made for hot climates, a low solar heat gain rating and a frame that doesn't conduct heat. Together, those keep a lot of the sun's heat outside, which makes rooms more comfortable and eases the load on your air conditioner.
Why glass matters so much in the desert
In cold climates, the main job of a window is to keep heat in. In the Valley, the bigger job is keeping the sun's heat out. Sunlight passing through ordinary glass warms floors, furniture and walls, and that heat stays in the room. A west-facing window in July can make a room feel several degrees warmer than the rest of the house.
The ratings to look for
Most windows carry a label from the National Fenestration Rating Council (NFRC) with a few key numbers.
- Solar Heat Gain Coefficient (SHGC). How much of the sun's heat gets through the glass, on a scale from 0 to 1. Lower is better in Arizona. This is the most important number for a desert home.
- U-factor. How well the whole window slows heat moving through it. Lower is better.
- Visible Transmittance (VT). How much daylight comes through. Higher means a brighter room. Some heavily tinted glass blocks heat but also makes rooms dim, so it's worth balancing.
ENERGY STAR certifies windows by climate zone. Phoenix and the East Valley are in the southern zone, so look for windows certified for that zone.
Low-E coatings
Low-E (low-emissivity) glass has a microscopically thin metallic coating that reflects much of the sun's heat and ultraviolet light while letting visible light through. Different coatings are tuned for different climates. For Mesa, ask for a coating designed for hot climates, sometimes called a solar-control low-E. It also helps protect floors and furniture from fading.
Gas fill and spacers
Many dual-pane windows fill the space between the panes with argon, which slows heat transfer better than air. Warm-edge spacers around the glass reduce heat moving through the edge of the window. Both are common on good replacement windows.
Frame materials
- Vinyl insulates well, needs little upkeep and is the most common choice in the Valley. Ask about colors made to resist fading in intense sun.
- Fiberglass is very stable in heat, so it holds its shape and seal over time.
- Aluminum is strong and slim but conducts heat. If you prefer it, look for frames with a thermal break.
Start with the hottest windows
You don't have to replace every window at once. Many homeowners start with the west- and south-facing windows and patio doors, where the sun does the most damage, and do the rest later.
Installation matters too
Even the best window performs poorly if it's not sealed properly. A good installer insulates the gap around the frame and seals it against air and dust. Ask how they'll handle that on your home.
Get help choosing
A local installer can bring samples, explain the ratings on each product and recommend glass for each side of your home in Mesa, Gilbert, Chandler, Tempe or Apache Junction. Send a request below or call (480) 788-5344.